XMPP commit

Validateur : anael <contact@cyberjinh.fr>
This commit is contained in:
root 2018-10-11 21:20:39 +02:00
commit 06c1c20514

323
prosody.cfg.lua Normal file
View File

@ -0,0 +1,323 @@
-- Prosody XMPP Server Configuration
--
-- Information on configuring Prosody can be found on our
-- website at https://prosody.im/doc/configure
--
-- Tip: You can check that the syntax of this file is correct
-- when you have finished by running this command:
-- prosodyctl check config
-- If there are any errors, it will let you know what and where
-- they are, otherwise it will keep quiet.
--
-- Good luck, and happy Jabbering!
---------- Server-wide settings ----------
-- Settings in this section apply to the whole server and are the default settings
-- for any virtual hosts
admins = {"anael@im.cyberjinh.fr", "keepwatchingme@im.cyberjinh.fr" }
-- Enable use of libevent for better performance under high load
-- For more information see: https://prosody.im/doc/libevent
--use_libevent = true
-- Prosody will always look in its source directory for modules, but
-- this option allows you to specify additional locations where Prosody
-- will look for modules first. For community modules, see https://modules.prosody.im/
plugin_paths = { "/usr/lib/prosody/modules/community-mod/prosody-modules" }
-- This is the list of modules Prosody will load on startup.
-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
-- Documentation for bundled modules can be found at: https://prosody.im/doc/modules
modules_enabled = {
-- Generally required
"roster"; -- Allow users to have a roster. Recommended ;)
"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
"tls"; -- Add support for secure TLS on c2s/s2s connections
"dialback"; -- s2s dialback support
"disco"; -- Service discovery
-- Not essential, but recommended
"private"; -- Private XML storage (for room bookmarks, etc.)
"vcard"; -- Allow users to set vCards
"csi";
-- These are commented by default as they have a performance impact
--"privacy"; -- Support privacy lists
"blocklist"; --New module replacing mod_privacy
--"compression"; -- Stream compression
-- Nice to have
--"log_auth"; -- Logging d'IP dans les log en cas d'échec d'authentification
"limit_auth"; -- Throttle authentication attempts with optional tarpit
"version"; -- Replies to server version requests
"uptime"; -- Report how long server has been running
"time"; -- Let others know the time here on this server
"ping"; -- Replies to XMPP pings with pongs
"pep"; -- Enables users to publish their mood, activity, playing music and more
"register"; -- Allow users to register on this server using a client and change passwords
"carbons"; -- XEP-0280 : allowing users to maintain a shared and synchronized view of all conversations across all their online clients and devices.
-- Admin interfaces
"admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
"admin_telnet"; -- Opens telnet console interface on localhost port 5582
-- HTTP modules
"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
"http_files"; -- Serve static files from a directory over HTTP
"websocket";
--"conversejs";
-- Other specific functionality
"posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
--"groups"; -- Shared roster support
"announce"; -- Send announcement to all online users
--"welcome"; -- Welcome users who register accounts
--"watchregistrations"; -- Alert admins of registrations
"motd"; -- Send a message to users when they log in
--"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
"smacks"; -- XEP-0198: Reliability and fast reconnects for XMPP
"cloud_notify"; -- XEP-0357: Cloud push notifications
"mam"; -- XEP-0313 message archive management
"mam_archive"; -- XEP-0136: Message Archiving for mod_mam
"http"; -- Active HTTP
"register_web"; -- Active registraion web page
"http_upload";
"webpresence";
"server_contact_info";
"block_registrations";
"pastebin";
"omemo_all_access";
}
-- These modules are auto-loaded, but should you want
-- to disable them then uncomment them here:
modules_disabled = {
-- "offline"; -- Store offline messages
-- "c2s"; -- Handle client connections
-- "s2s"; -- Handle server-to-server connections
-- "posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
}
console_ports = { 5582 }
--legacy_ssl_ports = { 5223 }
http_ports = { 5280 }
http_interfaces = { "*" }
https_ports = { 5281 }
https_interfaces = { "*" }
ssl = {
key = "/etc/prosody/certs/im.cyberjinh.fr/privkey.pem";
certificate = "/etc/prosody/certs/im.cyberjinh.fr/fullchain.pem";
}
https_ssl = {
key = "/etc/prosody/certs/im.cyberjinh.fr/privkey.pem";
certificate = "/etc/prosody/certs/im.cyberjinh.fr/fullchain.pem";
}
contact_info = {
abuse = { "xmpp:keepwatchingme@im.cyberjinh.fr", "https:cyberjinh.fr/contact.html" };
admin = { "xmpp:keepwatchingme@im.cyberjinh.fr", "https:cyberjinh.fr/contact.html" };
feedback = { "xmpp:keepwatchingme@im.cyberjinh.fr", "https:cyberjinh.fr/contact.html" };
support = { "xmpp:keepwatchingme@im.cyberjinh.fr", "https:cyberjinh.fr/contact.html" };
}
consider_bosh_secure = true
--cross_domain_bosh = true
cross_domain_websocket = { "https://im.cyberjinh.fr" };
consider_websocket_secure = true
-- mod_limit_auth --
limit_auth_period = 30
limit_auth_max = 5
-- mod_smacks --
smacks_hibernation_time = 300
smacks_enabled_s2s = false
smacks_max_unacked_stanzas = 0
smacks_max_ack_delay = 60
-- mod_cloud_notify --
push_notification_important_body = "Nouveau Message"
-- mod_conversjs --
conversejs_options = {
debug = true;
view_mode = "fullscreen";
}
-- Disable account creation by default, for security
-- For more information see https://prosody.im/doc/creating_accounts
allow_registration = true
--mod_block_registrations--
block_registrations_users = { "administrator", "admin", "hostmaster", "postmaster", "webmaster", "root", "xmpp", "anael" }
block_registrations_require = "^[a-zA-Z0-9_.-]+$" -- Allow only simple ASCII characters in usernames
-- Force clients to use encrypted connections? This option will
-- prevent clients from authenticating unless they are using encryption.
c2s_require_encryption = true
-- Force servers to use encrypted connections? This option will
-- prevent servers from authenticating unless they are using encryption.
-- Note that this is different from authentication
s2s_require_encryption = true
-- Force certificate authentication for server-to-server connections?
-- This provides ideal security, but requires servers you communicate
-- with to support encryption AND present valid, trusted certificates.
-- NOTE: Your version of LuaSec must support certificate verification!
-- For more information see https://prosody.im/doc/s2s#security
s2s_secure_auth = true
-- Some servers have invalid or self-signed certificates. You can list
-- remote domains here that will not be required to authenticate using
-- certificates. They will be authenticated using DNS instead, even
-- when s2s_secure_auth is enabled.
--s2s_insecure_domains = { "insecure.example" }
-- Even if you leave s2s_secure_auth disabled, you can still require valid
-- certificates for some domains by specifying a list here.
--s2s_secure_domains = { "jabber.org" }
-- Required for init scripts and prosodyctl
pidfile = "/var/run/prosody/prosody.pid"
-- Select the authentication backend to use. The 'internal' providers
-- use Prosody's configured data storage to store the authentication data.
-- To allow Prosody to offer secure authentication mechanisms to clients, the
-- default provider stores passwords in plaintext. If you do not trust your
-- server please see https://prosody.im/doc/modules/mod_auth_internal_hashed
-- for information about using the hashed backend.
authentication = "internal_hashed"
-- Select the storage backend to use. By default Prosody uses flat files
-- in its configured data directory, but it also supports more backends
-- through modules. An "sql" backend is included by default, but requires
-- additional dependencies. See https://prosody.im/doc/storage for more info.
storage = "internal" -- Default is "internal"
archive_store = "archive2"; -- the old data
-- For the "sql" backend, you can uncomment *one* of the below to configure:
--sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.
--sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
--sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
-- Archiving configuration
-- If mod_mam is enabled, Prosody will store a copy of every message. This
-- is used to synchronize conversations between multiple clients, even if
-- they are offline. This setting controls how long Prosody will keep
-- messages in the archive before removing them.
archive_expires_after = "2w" -- Remove archived messages after 2 weeks
max_archive_query_results = 20;
-- archiving options, see https://prosody.im/doc/modules/mod_mam
-- Logging configuration
-- For advanced logging see https://prosody.im/doc/logging
log = {
info = "/dev/null"; -- Change 'info' to 'debug' for verbose logging
error = "/var/log/prosody/prosody.err";
-- "*syslog"; -- Uncomment this for logging to syslog
-- "*console"; -- Log to the console, useful for debugging with daemonize=false
}
-- Uncomment to enable statistics
-- For more info see https://prosody.im/doc/statistics
-- statistics = "internal"
-- Certificates
-- Every virtual host and component needs a certificate so that clients and
-- servers can securely verify its identity. Prosody will automatically load
-- certificates/keys from the directory specified here.
-- For more information, including how to use 'prosodyctl' to auto-import certificates
-- (from e.g. Let's Encrypt) see https://prosody.im/doc/certificates
-- Location of directory to find certificates in (relative to main config file):
certificates = "/etc/prosody/certs"
----------- Virtual hosts -----------
-- You need to add a VirtualHost entry for each domain you wish Prosody to serve.
-- Settings under each VirtualHost entry apply *only* to that host.
VirtualHost "im.cyberjinh.fr"
http_host = "im.cyberjinh.fr"
enabled = true;
-- http_external_url = "im.cyberjinh.fr"
allow_registration = true;
min_seconds_between_registrations = 3600
-- Assign this host a certificate for TLS, otherwise it would use the one
-- set in the global section (if any).
-- Note that old-style SSL on port 5223 only supports one certificate, and will always
-- use the global one.
certificates = "/etc/prosody/certs/"
------ Components ------
-- You can specify components to add hosts that provide special services,
-- like multi-user conferences, and transports.
-- For more information on components, see http://prosody.im/doc/components
---Set up a MUC (multi-user chat) room server on conference.example.com:
Component "conference.im.cyberjinh.fr" "muc"
restrict_room_creation = "local"
name = "Chatroom powered by you"
modules_enabled = {
"pastebin";
"mam_muc";
"vcard_muc"
}
muc_log_by_default = true;
muc_log_all_rooms = false;
max_history_messages = 30;
admins = { "anael@im.cyberjinh.fr", "keepwatchingme@im.cyberjinh.fr" }
Component "pubsub.im.cyberjinh.fr" "pubsub"
default_admin_affiliation = "owner"
autocreate_on_publish = false
admins = { "anael@im.cyberjinh.fr", "keepwatchingme@im.cyberjinh.fr" }
-- Set up a SOCKS5 bytestream proxy for server-proxied file transfers:
Component "proxy.im.cyberjinh.fr" "proxy65"
---Set up an external component (default component port is 5347)
--
-- External components allow adding various services, such as gateways/
-- transports to other networks like ICQ, MSN and Yahoo. For more info
-- see: http://prosody.im/doc/components#adding_an_external_component
--
Component "upload.im.cyberjinh.fr"
http_upload_expire_after = 60 * 60 * 24 * 7
http_upload_file_size_limit = 10000000
--Component "irc.cyberjinh.fr"
-- component_secret = "/R0llerG4ng'"
ssl = {
key = "/etc/prosody/certs/im.cyberjinh.fr/privkey.pem";
certificate = "/etc/prosody/certs/im.cyberjinh.fr/fullchain.pem";
}