XMPP commit

Validateur : anael <contact@cyberjinh.fr>
2018-10-11 21:20:39 +02:00 · 2018-10-11 21:20:39 +02:00 · 06c1c20514
commit 06c1c20514
1 changed files with 323 additions and 0 deletions
--- a/prosody.cfg.lua
+++ b/prosody.cfg.lua
@ -0,0 +1,323 @@
+-- Prosody XMPP Server Configuration
+--
+-- Information on configuring Prosody can be found on our
+-- website at https://prosody.im/doc/configure
+--
+-- Tip: You can check that the syntax of this file is correct
+-- when you have finished by running this command:
+--     prosodyctl check config
+-- If there are any errors, it will let you know what and where
+-- they are, otherwise it will keep quiet.
+--
+-- Good luck, and happy Jabbering!
+
+
+---------- Server-wide settings ----------
+-- Settings in this section apply to the whole server and are the default settings
+-- for any virtual hosts
+
+
+admins = {"anael@im.cyberjinh.fr", "keepwatchingme@im.cyberjinh.fr" }
+
+-- Enable use of libevent for better performance under high load
+-- For more information see: https://prosody.im/doc/libevent
+--use_libevent = true
+
+-- Prosody will always look in its source directory for modules, but
+-- this option allows you to specify additional locations where Prosody
+-- will look for modules first. For community modules, see https://modules.prosody.im/
+   plugin_paths = { "/usr/lib/prosody/modules/community-mod/prosody-modules" }
+
+-- This is the list of modules Prosody will load on startup.
+-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
+-- Documentation for bundled modules can be found at: https://prosody.im/doc/modules
+modules_enabled = {
+
+	-- Generally required
+		"roster"; -- Allow users to have a roster. Recommended ;)
+		"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
+		"tls"; -- Add support for secure TLS on c2s/s2s connections
+		"dialback"; -- s2s dialback support
+		"disco"; -- Service discovery
+
+	-- Not essential, but recommended
+		"private"; -- Private XML storage (for room bookmarks, etc.)
+		"vcard"; -- Allow users to set vCards
+		"csi";
+
+	-- These are commented by default as they have a performance impact
+		--"privacy"; -- Support privacy lists
+		"blocklist"; --New module replacing mod_privacy
+		--"compression"; -- Stream compression
+
+	-- Nice to have
+		--"log_auth"; -- Logging d'IP dans les log  en cas d'échec d'authentification 
+		"limit_auth"; -- Throttle authentication attempts with optional tarpit
+		"version"; -- Replies to server version requests
+		"uptime"; -- Report how long server has been running
+		"time"; -- Let others know the time here on this server
+		"ping"; -- Replies to XMPP pings with pongs
+		"pep"; -- Enables users to publish their mood, activity, playing music and more
+		"register"; -- Allow users to register on this server using a client and change passwords
+		"carbons";  -- XEP-0280 : allowing users to maintain a shared and synchronized view of all conversations across all their online clients and devices.
+	-- Admin interfaces
+		"admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
+		"admin_telnet"; -- Opens telnet console interface on localhost port 5582
+	
+	-- HTTP modules
+		"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
+		"http_files"; -- Serve static files from a directory over HTTP
+		"websocket"; 
+		--"conversejs";
+
+	-- Other specific functionality
+		"posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
+		--"groups"; -- Shared roster support
+		"announce"; -- Send announcement to all online users
+		--"welcome"; -- Welcome users who register accounts
+		--"watchregistrations"; -- Alert admins of registrations
+		"motd"; -- Send a message to users when they log in
+		--"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
+		"smacks"; --  XEP-0198: Reliability and fast reconnects for XMPP
+		"cloud_notify"; -- XEP-0357: Cloud push notifications
+		"mam"; -- XEP-0313 message archive management
+		"mam_archive"; -- XEP-0136: Message Archiving for mod_mam
+		"http"; -- Active HTTP
+		"register_web"; -- Active registraion web page
+		"http_upload";
+		"webpresence";			 
+		"server_contact_info";
+		"block_registrations";
+		"pastebin";
+		"omemo_all_access";
+	}
+
+-- These modules are auto-loaded, but should you want
+-- to disable them then uncomment them here:
+modules_disabled = {
+	-- "offline"; -- Store offline messages
+	-- "c2s"; -- Handle client connections
+	-- "s2s"; -- Handle server-to-server connections
+	-- "posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
+}
+
+console_ports = { 5582 }
+--legacy_ssl_ports = { 5223 }
+
+	http_ports = { 5280 }
+	http_interfaces = { "*" }
+ 
+	https_ports = { 5281 }
+	https_interfaces = { "*" }
+
+ ssl = {
+	key = "/etc/prosody/certs/im.cyberjinh.fr/privkey.pem";
+	certificate = "/etc/prosody/certs/im.cyberjinh.fr/fullchain.pem";
+ }
+
+ https_ssl = {
+        key = "/etc/prosody/certs/im.cyberjinh.fr/privkey.pem";
+        certificate = "/etc/prosody/certs/im.cyberjinh.fr/fullchain.pem";
+ }
+
+contact_info = {
+	  abuse = { "xmpp:keepwatchingme@im.cyberjinh.fr", "https:cyberjinh.fr/contact.html" };
+	  admin = { "xmpp:keepwatchingme@im.cyberjinh.fr", "https:cyberjinh.fr/contact.html" };
+	  feedback = { "xmpp:keepwatchingme@im.cyberjinh.fr", "https:cyberjinh.fr/contact.html" };
+	  support = { "xmpp:keepwatchingme@im.cyberjinh.fr", "https:cyberjinh.fr/contact.html" };
+  }
+consider_bosh_secure = true
+--cross_domain_bosh = true
+
+cross_domain_websocket = { "https://im.cyberjinh.fr" };
+consider_websocket_secure = true
+
+-- mod_limit_auth --
+limit_auth_period = 30
+limit_auth_max = 5
+
+-- mod_smacks --
+smacks_hibernation_time = 300
+smacks_enabled_s2s = false
+smacks_max_unacked_stanzas = 0
+smacks_max_ack_delay = 60
+
+-- mod_cloud_notify -- 
+push_notification_important_body = "Nouveau Message"
+
+-- mod_conversjs --
+conversejs_options = {
+		debug = true;
+	        view_mode = "fullscreen";
+	}
+
+-- Disable account creation by default, for security
+-- For more information see https://prosody.im/doc/creating_accounts
+allow_registration = true 
+
+--mod_block_registrations--
+block_registrations_users = { "administrator", "admin", "hostmaster", "postmaster", "webmaster", "root", "xmpp", "anael" }
+block_registrations_require = "^[a-zA-Z0-9_.-]+$" -- Allow only simple ASCII characters in usernames
+
+-- Force clients to use encrypted connections? This option will
+-- prevent clients from authenticating unless they are using encryption.
+
+c2s_require_encryption = true
+
+-- Force servers to use encrypted connections? This option will
+-- prevent servers from authenticating unless they are using encryption.
+-- Note that this is different from authentication
+
+s2s_require_encryption = true
+
+
+-- Force certificate authentication for server-to-server connections?
+-- This provides ideal security, but requires servers you communicate
+-- with to support encryption AND present valid, trusted certificates.
+-- NOTE: Your version of LuaSec must support certificate verification!
+-- For more information see https://prosody.im/doc/s2s#security
+
+s2s_secure_auth = true
+
+-- Some servers have invalid or self-signed certificates. You can list
+-- remote domains here that will not be required to authenticate using
+-- certificates. They will be authenticated using DNS instead, even
+-- when s2s_secure_auth is enabled.
+
+--s2s_insecure_domains = { "insecure.example" }
+
+-- Even if you leave s2s_secure_auth disabled, you can still require valid
+-- certificates for some domains by specifying a list here.
+
+--s2s_secure_domains = { "jabber.org" }
+
+
+-- Required for init scripts and prosodyctl
+pidfile = "/var/run/prosody/prosody.pid"
+
+-- Select the authentication backend to use. The 'internal' providers
+-- use Prosody's configured data storage to store the authentication data.
+-- To allow Prosody to offer secure authentication mechanisms to clients, the
+-- default provider stores passwords in plaintext. If you do not trust your
+-- server please see https://prosody.im/doc/modules/mod_auth_internal_hashed
+-- for information about using the hashed backend.
+
+authentication = "internal_hashed"
+
+-- Select the storage backend to use. By default Prosody uses flat files
+-- in its configured data directory, but it also supports more backends
+-- through modules. An "sql" backend is included by default, but requires
+-- additional dependencies. See https://prosody.im/doc/storage for more info.
+
+storage = "internal" -- Default is "internal"
+archive_store = "archive2"; -- the old data
+
+-- For the "sql" backend, you can uncomment *one* of the below to configure:
+--sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.
+--sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
+--sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
+
+
+-- Archiving configuration
+-- If mod_mam is enabled, Prosody will store a copy of every message. This
+-- is used to synchronize conversations between multiple clients, even if
+-- they are offline. This setting controls how long Prosody will keep
+-- messages in the archive before removing them.
+
+archive_expires_after = "2w" -- Remove archived messages after 2 weeks
+max_archive_query_results = 20; 
+-- archiving options, see https://prosody.im/doc/modules/mod_mam
+
+-- Logging configuration
+-- For advanced logging see https://prosody.im/doc/logging
+log = {
+	info = "/dev/null"; -- Change 'info' to 'debug' for verbose logging
+	error = "/var/log/prosody/prosody.err";
+	-- "*syslog"; -- Uncomment this for logging to syslog
+	-- "*console"; -- Log to the console, useful for debugging with daemonize=false
+}
+
+-- Uncomment to enable statistics
+-- For more info see https://prosody.im/doc/statistics
+-- statistics = "internal"
+
+-- Certificates
+-- Every virtual host and component needs a certificate so that clients and
+-- servers can securely verify its identity. Prosody will automatically load
+-- certificates/keys from the directory specified here.
+-- For more information, including how to use 'prosodyctl' to auto-import certificates
+-- (from e.g. Let's Encrypt) see https://prosody.im/doc/certificates
+
+-- Location of directory to find certificates in (relative to main config file):
+certificates = "/etc/prosody/certs"
+
+
+----------- Virtual hosts -----------
+-- You need to add a VirtualHost entry for each domain you wish Prosody to serve.
+-- Settings under each VirtualHost entry apply *only* to that host.
+
+VirtualHost "im.cyberjinh.fr"
+http_host = "im.cyberjinh.fr"
+enabled = true; 
+-- http_external_url = "im.cyberjinh.fr"
+allow_registration = true;
+min_seconds_between_registrations = 3600
+
+
+	-- Assign this host a certificate for TLS, otherwise it would use the one
+	-- set in the global section (if any).
+	-- Note that old-style SSL on port 5223 only supports one certificate, and will always
+	-- use the global one.
+ certificates = "/etc/prosody/certs/"
+
+------ Components ------
+-- You can specify components to add hosts that provide special services,
+-- like multi-user conferences, and transports.
+-- For more information on components, see http://prosody.im/doc/components
+
+---Set up a MUC (multi-user chat) room server on conference.example.com:
+ Component "conference.im.cyberjinh.fr" "muc"
+ restrict_room_creation = "local" 
+ name = "Chatroom powered by you"
+ modules_enabled = {
+		"pastebin";
+		"mam_muc";		
+		"vcard_muc"	
+}
+
+ muc_log_by_default = true;
+ muc_log_all_rooms = false;
+ max_history_messages = 30;
+
+admins = { "anael@im.cyberjinh.fr", "keepwatchingme@im.cyberjinh.fr" }
+
+Component "pubsub.im.cyberjinh.fr" "pubsub"
+default_admin_affiliation = "owner"
+autocreate_on_publish = false
+admins = { "anael@im.cyberjinh.fr", "keepwatchingme@im.cyberjinh.fr" }
+
+
+-- Set up a SOCKS5 bytestream proxy for server-proxied file transfers:
+Component "proxy.im.cyberjinh.fr" "proxy65"
+
+---Set up an external component (default component port is 5347)
+--
+-- External components allow adding various services, such as gateways/
+-- transports to other networks like ICQ, MSN and Yahoo. For more info
+-- see: http://prosody.im/doc/components#adding_an_external_component
+--
+
+Component "upload.im.cyberjinh.fr"
+http_upload_expire_after = 60 * 60 * 24 * 7 
+http_upload_file_size_limit = 10000000
+
+
+
+--Component "irc.cyberjinh.fr"
+--	component_secret = "/R0llerG4ng'"
+
+ ssl = {
+	key = "/etc/prosody/certs/im.cyberjinh.fr/privkey.pem";
+	certificate = "/etc/prosody/certs/im.cyberjinh.fr/fullchain.pem";
+ }
+